How To Weight Down A Shower Curtain Liner – Cheap Weighting Technique

By The Shower Drapes | Blog

Jun 02

The easiest way to make a shower curtain liner heavier is by adding a coat of dry-brush paint. This method works well but demands the greatest amount of work. Make sure the paint is waterproof or allow ample time for it to dry thoroughly.

If you’re worried about how to weight down a curtain liner, another option is to use soap in the liner. The method I’m about to discuss involves just a bit of elbow grease.

The first step in how to weight down a curtain liner is to lift it out of the pan. Start by lifting it out about one inch from the top. Carefully drop the pan in place, making sure to make sure that it is well covered with water.

If you are going to use a shower curtain liner made of rubber, then make sure that you get it wet enough so that it comes up to the ceiling. Dampen it before you add it to the pan. Add the bathtub ring, and then add the liner.

The next tip for how to weight down a shower curtain liner is to put it into the pan and then get it out again. This is a little tricky.

Cover the pan with water. With the help of two people, add a couple of inches of water. Then take the pan out and cover it with another layer of water. Make sure that the water covers the rim of the pan, and you can remove the pan later.

I’m going to share the steps on how to weight down a curtain with the aid of a free standing wet bar. It’s pretty simple. Just put the water in place and lift the curtain out.

Here’s a tip on how to weight down a curtain liner with the aid of a bunch of weights. There’s a metal ring that’s weighted with bricks that will go in the pan, but there’s also a shower curtain that’s weighted with weights. Simply find a large old shower curtain that you’ve got to hang around the house and put a load of bricks in the center, weight it down with weights, and put a shower curtain on top of the bricks.

As for this method, you’ll probably need to put a shower curtain on top of the weight so that the water will drain down away from the brick. You will also need to fill the rest of the pan up with water and wrap the door shut.

In addition to that, if you want to weight down a curtain liner with the aid of a bathroom scale, simply weigh the curtain down. You can easily use a measuring tape or even a pencil.

First, measure the length of the curtain you’re going to put in the pan. Now take the weight and put it in the back of the shower curtain and start putting the curtain over the weight. When you get near the end of the curtain, make sure that the ring on the weight is facing up and that the weighted curtain is completely covered with water.

Once you’ve done that, you can remove the curtain. If you want to add some weight to the curtain, there are weights that can be added to the top or bottom of the curtain. Here’s a hint: If you have a small bathroom and you only have to add a tiny bit of weight, you can add the weights to the bottom of the curtain.

About the Author

There are affiliate links in this post. At no cost to you, I get commissions for purchases made through links in this post.