Disclaimer: There are affiliate links in this post. At no cost to you, I get commissions for purchases made through links in this post.
How to clean rust off shower curtain rod is not an easy task for those who want to do it themselves. This will require some skill and a lot of patience to get the rod to look like new.
Rust does not do well with water. It dries up easily when you try to remove it from the rod. Therefore, to get rust off shower curtain rod it needs to be dried before you begin to clean it. To get rust off shower curtain rod you should either use a lint free cloth or a paper towel with a rag.
The first thing you want to do is to wet down the rod and let it dry. You then want to run the rod under water in order to make sure all of the remaining rust is removed. The rod can be placed under running water, or you can run it under hot water to make sure it is completely soaked. You want to make sure that the rod dries completely before you move on to the next step.
You can purchase a rust removal kit or use a brush to apply it to the rod. Both methods are effective. There are also many over the counter products that you can use. If you do not have one of these readily available you may want to consider purchasing a kit and using it instead.
The rust removal kits usually come with a brush and a cloth or paper towel, which you will need to use to wipe off the rust. Once the rust is removed, you will need to cover the rod with clear tape in order to keep it from rusting back up.
Another way to clean rust off shower curtain rod is to use white vinegar. You can purchase a container of white vinegar or you can make your own by mixing one cup of white vinegar with two cups of warm water.
Mix the vinegar into the water until the solution is well combined. You will want to allow the mixture to sit for a few minutes to let the vinegar to dissolve any remaining rust on the rod. Once the solution has completely dissolved you can place the rod into the bucket of the bucket set.
If you do not have any vinegar available you may use a citrus based cleaner such as lemon or lime. Once you have scrubbed the rust off, you will want to make sure that the rod is completely dry before you re-install it.
Another tip to help you clean rust off shower curtain rod is to use a cleaner that is specifically designed for stains. Most of the cleaners that are available at home improvement stores are specifically made for the cleaning of metals.
If you do not have one of these available, you can purchase a stainless steel rod or any other rod that you may be needing to clean. You can place the rod in a bucket and fill it up with hot water.
Once the water has cooled, you will want to add the cleaner you are planning to use, hot water, and vinegar. Allow the mixture to sit for at least 10 minutes to allow the crust to sink down to the iron rod.
After the vinegar has been added, you will want to simply place the rod in the bucket and remove the hot water. Allow the rod to sit for about an hour before you are ready to re-install it.