Disclaimer: There are affiliate links in this post. At no cost to you, I get commissions for purchases made through links in this post.
If you want to know how to stop shower curtain mold, it’s important to know what causes it in the first place. Mold thrives in damp and warm places, and its normal habitat is dark, damp places.
The cause of shower curtain mold is not always obvious, but the best way to find out is to learn what showers look like before they start to appear as a result of mold. To start with, there will be a mildew smell inside your bathroom.
Look closely, and it might be hidden under the surface of the water. Once you’ve spotted it, you can work on eliminating it by changing the water. Remember, though, that the problem will most likely return if the original problem is not dealt with.
The cause of shower curtain mold is moisture, but what exactly causes it? Firstly, think about how water is used in your shower. The hot water turns down the temperature inside the tub, so it should come down around seventy degrees Fahrenheit or so.
With your body temperature rises, the water is still relatively hot when it comes down. Now imagine what would happen if you were to leave the thermostat off, as it should be every time you shower. For some people, this isn’t a problem, but for others, it could be disastrous.
It’s probably no surprise to know that you’re going to have leaks, and it’s far more likely that the leaks are going to cause the mold than it is that the bathtub liner is going to let water through. Changing the liners is a good start, but unless you address the problem of mold, there is no way you’re going to stop it.
So, how to stop shower curtain mold? Well, just treat the water the same way you would treat it at home. You could install a dehumidifier, but this isn’t really something you need for a lot of showers.
The hot water should be turned down again to an appropriate temperature, as it may still be a little warm when it comes down the pipes. You may also be able to find a special dehumidifier that can only turn the hot water on and off, or which has a lower power rating.
Once the temperature has been corrected, you can begin the work of how to stop shower curtain mold. You’ll need to protect the walls of the tub, and this is where it’s possible to make a difference by using certain chemicals.
Certain chemicals like VOCs can be dangerous to the lungs, so it’s best to avoid them if you can. There are some non-toxic, chemical-free sprays which will do the job just as well.
The best way to protect the walls of your tub is to use a good water barrier, which will be the perfect answer to how to stop shower curtain mold. You can make a temporary one by simply covering the edges of the tub walls with plastic and then applying a water-based penetrating agent, such as P-X-G, to the whole area.
Remember, you must treat the water in the tub before you can tackle how to stop shower curtain mold. If you wait until it’s already infected, the job will be virtually impossible.